Antal varer i kurv: 0 stk, Pris i alt: 0,00 DKK
Gå til kurv

FloppyDTV C/CI DVB-C Tuner



  • 1.795,00Dkk
  • Ikke på lager, levering 3-4 hverdage

Beskrivelse af varen

Digital Cable ( DVB-C ) Receiver for multimedia computer Main Features -------------------------------------------------------------------------------- Support for HDTV Channels - DVB-C receiver (up to QAM256 ) - Software decoding of MPEG2 and MPEG4 / H.264 - Watch and record TV in the highest available quality Read the "System requirements" below! -------------------------------------------------------------------------------- Support for PayTV Channels - Integrated Common Interface , watch and record Free To Air or PayTV channels - Compatible with most popular CAMs - Tested with several PayTV providers PayTV channels require a CAM and a valid smartcard (subscription) -------------------------------------------------------------------------------- Fully integrated in Windows Media Center - Easy to use in Windows Media Center - Driver for Windows Media Center in Vista64 are also available in the download section Windows Media Center doesnt support MPEG4/H.264 channels!!! -------------------------------------------------------------------------------- Integrated in most popular Media Center Software - Fully integrated in many TV Software like DVBViewer , Mediaportal - Driver for Vista 64 bit also available in the download section -------------------------------------------------------------------------------- Fits in almost any computer! - FloppyDTV S2 can be mounted on any PCI, PCI-Express, AGP or empty slot - Need only a single PCI Slot - Connection to the computer through FireWire (IEEE1394) - Easy connect more than one FloppyDTV thanks to the integrated FireWire Repeater - Also suitable to be mounted on 3,5" Floppy Drive Bay (additional adapter available separately) - Download the Assembly Guide System requirements -------------------------------------------------------------------------------- - FireWire (IEEE1394) port on board or with OHCI-adapter - For PayTV: CAM-Module, valid subscription/smartcard - For Windows Media Center in WinMCE 2005: RollUp2, MPEG2 software decoder - For Windows Media Center in Vista: Vista Home Premium or Vista Ultimate - For other compatible TV software: Windows XP SP2 or later, MPEG2 decoder - For SDTV: Pentium@ IV 1,5GHz, AMD Athlon XP+ 2000 - For HDTV: Minimum: Pentium@ IV 3,5GHz, AMD Athlon XP+ 3500, DXVA/H.264 graphic card (Windows XP) Recommended: Dual Core processor (REQUIRED for WinMCE 2005 or Vista) - For H.264 channels: H.264 software decoders Front End features -------------------------------------------------------------------------------- - Antenna Connector Input: IEC-Type 75 Ohm - Antenna Connector Output: IEC-Type 75 Ohm - Input Frequency Range: 170-858MHz - Supported Modulation: QAM4, QAM16, QAM64, QAM 128, QAM256 Included in the "FloppyDTV C/CI" -------------------------------------------------------------------------------- - FloppyDTV C/CI, with pre-assembled power cable and FireWire cable (also suitable for connection to the motherboard) - Antenna Cable - Printed Assembly and Quick Install Guide - Setup CD with BDA and Windows Media Center driver for WinMCE 2005 and Vista 32Bit (Home Premium or Ultimate) - FireDTV Viewer Software to watch and record TV channels. Vista 32 and 64 capable, H.264 capable - Vista 64Bit driver are available for download MPEG4 / H.264 Software decoders are NOT included in the FloppyDTV C/CI package Accessories (sold separately) -------------------------------------------------------------------------------- A "FloppyDTV Extender KIT" will be available soon and will include: - 3,5" FloppyDTV Adapter - Remote control - MPEG2 / MPEG4 Software decoders - CD with Drivers and FireDTV Software